I may not know how to make a diff yet but I can do some grunt work for you. Here is a cut and paste of Z's various threads. You could use this as a start for a diff on the newbie install guide. I added notes about some of the links that may change. Copyright notice is left on.
*****
Unless otherwise noted, all text is taken from:
http://seq.sourceforge.net/showthread.php?s=&threadid=70
RedHat 7.1 & 7.2 users guide.
ShowEQ Install for newbies (RedHat 7.1/7.2 edition)
Copyright 2001 Zaphod (
[email protected])
------------------------------------------------------------------------
=====
RedHat 7.1 users, do the following:
1. Get the following gcc 3.x RPMS and dependencies from ftp://ftp.rpmfind.net/linux/C/redha...386/RedHat/RPMS :
binutils-2.11.92.0.12-4.i386.rpm
glibc-2.2.4-20.i386.rpm
glibc-common-2.2.4-20.i386.rpm
glibc-devel-2.2.4-20.i386.rpm
gcc3-3.0.1-3.i386.rpm
gcc3-c++-3.0.1-3.i386.rpm
libgcc-3.0.1-3.i386.rpm
libstdc++3-3.0.1-3.i386.rpm
libstdc++3-devel-3.0.1-3.i386.rpm
2. Install them using the following commands:
code:
$ rpm -Uhv glibc-2.2.4-20.i386.rpm glibc-common-2.2.4-20.i386.rpm glibc-devel-2.2.4-20.i386.rpm
$ rpm -Uhv binutils-2.11.92.0.12-4.i386.rpm
$ rpm -ihv gcc3-3.0.1-3.i386.rpm gcc3-c++-3.0.1-3.i386.rpm libgcc-3.0.1-3.i386.rpm libstdc++3-3.0.1-3.i386.rpm libstdc++3-devel-3.0.1-3.i386.rpm
=====
RedHat 7.2 users do the following:
1. Make sure you have the following RPMS installed:
gcc3
gcc3-c++
libgcc
libstdc++3
libstdc++3-devel
You can verify that they are installed using the following command:
code:
$ rpm -q gcc3 gcc3-c++ libgcc libstdc++3 libstdc++3-devel
If everything is installed, skip to installing and compiling Qt.
2. Insert the RedHat 7.2 CD 2 into your CDROM drive and mount it using the following command
code:
$ mount /mnt/cdrom
3. install the g++ 3 compiler by doing the following commands:
code:
$ cd /mnt/cdrom/RedHat/RPMS
$ rpm -ihv gcc3-3.0.1-3.i386.rpm gcc3-c++-3.0.1-3.i386.rpm libgcc-3.0.1-3.i386.rpm libstdc++3-3.0.1-3.i386.rpm libstdc++3-devel-3.0.1-3.i386.rpm
If there weren't any errors, g++ 3.x is now installed.
=====
Installing and compiling Qt
Option 1:
If you have not already done so, download the sources to qt-2.3.2 from www.trolltech.com and the patch attached to this post.
To compile qt-2.3.2 using the 3.x compiler from the RedHat RPMS do the following:
code:
$ cd /usr/local
$ gtar xzvf <download_dir>/qt-x11-2.3.2.tar.gz
$ gunzip -c <download_dir>/qt-2.3.2-gcc3.patch | patch -p 0
$ cd qt-2.3.2
$ export QTDIR=/usr/local/qt-2.3.2
$ export PATH=$QTDIR/bin:$PATH
$ export LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH
$ configure -release -shared -gif -xft -sm -system-libmng -system-zlib -system-libpng -system-jpeg -no-g++-exceptions -thread
$ make
Replace <download_dir> with wherever you downloaded the files to. You also might want to put the environment variable setting stuff into a shell script for later reuse.
The options to configure are more or less taken from the qt.spec file from the RedHat qt-2.3.1 SRPM, the main option that is really needed is -thread.
Option 2:
This section based on:
http://seq.sourceforge.net/showthread.php?s=&threadid=204
Ed. Note: Files listed below were provided by Zaphod as is and with no commitment to keep them available. The sites listed here were good as of January 3, 2002. They may be unavailable at any time. See http://seq.sourceforge.net/ for alternative sources.
Qt 2.3.2 RPMs compiled with Gcc 3 for RedHat 7.1/7.2 are available at http://www.doomed.to/showeq/
The two RPMS you need for ShowEQ 4.0 are qt-gcc3-2.3.2-1.i386.rpm and qt-gcc3-devel-2.3.2-1.i386.rpm which are also being mirrored under ftp://azriel.trifocus.net/pub/redhat .
To install the RPMs use the following command:
code:
rpm -ihv qt-gcc3-2.3.2-1.i386.rpm qt-gcc3-devel-2.3.2-1.i386.rpm
These RPMs install Qt under /opt/qt-gcc3-2.3.2 so adjust any instructions you are following to use that path. These were compiled with the version of G++ 3.x included with RedHat 7.2.
I've also included a handy dandy shell script for the bash/sh users in the audience called '/opt/bin/useqt232'. Just source it as follows:
code:
$ . /opt/bin/useqt232
To setup the appropriate QT environment variables.
You still need to set the compiler related environment variables for configuring and compiling ShowEQ though.
=====
Get libEQ.a
Ed. Note: libEQ.a is occassionaly difficult to obtain. The sites listed here were good as of January 3, 2002. They may be unavailable at any time. See http://seq.sourceforge.net/ for alternative sources.
Download the libEQ.a file from ftp://smurfette.trifocus.net/pub/libeq/i386/linux (with md5sum 8da5608635e69205807fbf6e41e9bc2f ) and place it in your /usr/local/lib directory.
Other current sources of libEQ.a:
http://www.doomed.to/showeq/
ftp://azriel.trifocus.net/pub/redhat .
=====
ShowEQ getting, configuring and compiling
After you have successfully installed/compiled qt-2.3.2 (using the g++ 3.x compilers and the -thread configuration option) and installed libEQ.a you can get ShowEQ and configure it by doing the following (where <yourdir> is where you want to put the ShowEQ sources):
code:
$ cd <yourdir>
$ export CVSROOT=:pserver:
[email protected] :/cvsroot/seq
$ cvs login
Hit enter when prompted for a password
$ cvs checkout showeq
$ cd showeq
$ export QTDIR=/usr/local/qt-2.3.2
$ export PATH=$QTDIR/bin:$PATH
$ export LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH
$ export CXX=g++3
$ export CC=gcc3
$ make -f Makefile.dist
$ ./configure
Then do make as usual:
code:
$ make
su to root, and install ShowEQ
code:
$ su
Enter your linux systems root password
$ make install
=====
If this is your first time using a new version of showeq, make sure to either update your showeq.conf file based on showeq.conf.dist or create a showeq.conf file based on it. Typically you put the resulting showeq.conf under /usr/local/share/showeq/ .
=====
To run the resulting binary, su to root, and make sure to setup the QT environment variables (as I said earlier you probably wan't to put these into a shell script):
code:
$ export QTDIR=/usr/local/qt-2.3.2
$ export PATH=$QTDIR/bin:$PATH
$ export LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH
Then run showeq (you can add command line options to suit):
code:
$ showeq
And theoretically, if you did everything correctly and I didn't have too many typos ShowEQ should run as expected.
=====
Using this procedure you do not have to uninstall anything, nor change any links manually.
I hope this helps.
Enjoy,
Zaphod (dohpaZ)
P.S. The copyright notice at the top is mainly to put unscrupulous guide writers on notice not to copy this into their guides and sell them. ;)