Server Crash

[Gdepp519]

I have the Server Program Running on my Desktop Computer which has WindowsXP Prof.. as it's main OS...

I have Showeq running on my Laptop... and the Laptop has the same OS.. WinXP Prof...

My Problems is... "and everyone please bare with me im new to this program... " my problem is that.. when i run both programs and Eq... everything works fine... now.. problems occur when i move my character in Everquest... if i even move the character sightly.. the Server Program on my Desktop Computer crashes... and give me an error message which is the normal deal.... and no indepth explanation....

"myseqserver.exe... has crashed due to unknown problems... and had to be closed.... would you like to send a message to 'such and such'......."

So, is there something that i am missing.. anything that I am doing wrong.. if there is a solution could you please make it as simple as possible.. I am new to his program.. so please anyone HELP ME!!!

[MQSEQ2]

Since you are new, what we aleays request is the version numbers:

Server: 1.9b or 1.10?
Client: 1.13.x, 1.14.1, 1.14.2, 1.15.1, 1.15.2, 1.15.3, 1.15.4, 1.15.5, 1.15.6, 1.15.7?

Copy your Server Ini file so we can verify you are using the correct offsets.

[Midnight]

Sounds like he's using 1.10 and just needs to rollback to 1.9b with the newest offsets. There is a new post detailing the installation instructions here. This should answer all your questions.

http://seq.sourceforge.net/forums/showthread.php?s=&threadid=4258

[MQSEQ2]

I figure he's running 1.10 but not having the correct offsets could mess something up as well.

[Gdepp519]

The Version I have is 1.10.... and my friend gave me the updated file i beleive of the 'Offsets'... I beleive that's what they are called... and the myseq program version is 1.15.4 if that helps too....

Here is the info in the 'Setup file...'

[Settings]
Port=6969
Refresh=0
ShowIniRead=0

[Memory Offsets]
GroupCountAddr=7454208
GroupAddr=7454536
SpawnHeaderAddr=7460984
ItemsAddr=7460988
CharAddr=7461040
CharInfo=7461048
TargetAddr=7461052
GuildsAddr=7479052
ZoneAddr=7055468

[SpawnInfo Offsets]
NameOffset=1
LastnameOffset=65
XOffset=104
YOffset=108
ZOffset=112
SpeedOffset=128
HeadingOffset=132
LinkdeadOffset=229
LFGOffset=232
EquipmentHeadOffset=272
EquipmentChestOffset=276
EquipmentArmsOffset=280
EquipmentWristsOffset=284
EquipmentHandsOffset=288
EquipmentLegsOffset=292
EquipmentFeetOffset=296
EquipmentPrimaryOffset=300
EquipmentSecondaryOffset=304
NextOffset=316
PrevOffset=328
TypeOffset=364
GenderOffset=374
LevelOffset=372
HideOffset=376
ClassOffset=378
SpawnIDOffset=384
RaceOffset=392
AFKOffset=404
BodyTypeOffset=408
HPCurrentOffset=412
DeityOffset=424
HPMaxOffset=428
GuildIDOffset=432
SpawnInfoEndOffset=436

[GroundItem Offsets]
PrevOffset=0
NextOffset=4
SpawnIDOffset=12
ZOffset=32
XOffset=36
YOffset=40
NameOffset=44
GroundItemEndOffset=68

[CharInfo Offsets]
NameOffset=2
LastnameOffset=66
GenderOffset=136
RaceOffset=140
ClassOffset=144
LevelOffset=152
ExpOffset=156
PracticePointsOffset=160
ManaOffset=164
BaseHPOffset=168
StunnedOffset=172
BaseSTROffset=176
BaseSTAOffset=180
BaseCHAOffset=184
BaseDEXOffset=188
BaseINTOffset=192
BaseAGIOffset=196
BaseWISOffset=200
LanguagesOffset=204
YOffset=2640
XOffset=2644
ZOffset=2648
HeadingOffset=2652
StandStateOffset=2656
PlatOffset=2660
GoldOffset=2664
SilverOffset=2668
CopperOffset=2672
BankPlatOffset=2676
BankGoldOffset=2680
BankSilverOffset=2684
BankCopperOffset=2688
BankSharedPlatOffset=2708
SkillOffset=2740
HungerLevelOffset=3420
ThirstLevelOffset=3424
SpawnInfo=3452
SpawnInfoOffset=3452
STROffset=3584
STAOffset=3588
CHAOffset=3592
DEXOffset=3596
INTOffset=3600
AGIOffset=3604
WISOffset=3608
SaveMagicOffset=3616
SaveFireOffset=3620
SaveColdOffset=3624
SavePoisonOffset=3628
SaveDiseaseOffset=3632
CurrWeightOffset=3638
DietyOffset=4884
AAExpOffset=5364
ServerNameOffset=8288
CharInfoEndOffset=8328

SpawnInfoEndOffset=436
GroundItemEndOffset=68
CharInfoEndOffset=8328

[CybMax]

For starters you can use this as zoneaddr : ZoneAddr=7838464

This will help a bit on the stability, but the 1.10 server is not completely stable.. i can sometimes use the 1.10 a whole day, and others it "chain crashes".. heh

So.. try changing the zoneaddr first.. and if the problems are still there, go back to using 1.9b server.

[Gdepp519]

I tried changing the Zone address... and i saved the changes but i still have the same error.... how should I go about using the 1.9b server??. do i just download it and install it???... or is there another way... (This is my first time using Seq.. be gentle.. lol)

[MQSEQ2]

Use Server 1.9b listed in the Development area.

[Gdepp519]

Just for my own personal knowledge why should i use 1.9b... instead over version 1.10??

[MQSEQ2]

Because there is a long thread of folks having problems with 1.10. So I posted to start using 1.9b since there was no major difference between the two versions. MySEQ doesn't gain any more functions from 1.10 over 1.9b. I wrote 1.10 in the attempt to start the process of converting it to what Server 2.0 is going to be. So please read the thread in the development areas if you want more information.

[Gdepp519]

I have anothe error essage now... it says...

"Could not connect to the server: No Connection could be made because the target machine actively refused it."...

Am i missing some install that i need to do? or change something in the setup file??

[MQSEQ2]

Which server are you trying to connect too now?

1.10 uses Port 6969 by default (Configured in the Ini)
1.9b uses Port 5555 hardcoded in the server.

Make sure your Client is pointing to the correct port in the Options (f1).

[xeerex]

The last error message is most likely that you did not point the client to the server's IP address on your LAN.

To make this easier on you, go to the following thread and download the versions listed for 11/14/03. They will self install with a readme that should explain most of what you need to know.

http://seq.sourceforge.net/forums/showthread.php?s=&threadid=4258

[Gdepp519]

It Works!!!!.. thanks for help all...

[xeerex]

No problem. The dev's are working hard to get mySEQ on par with SEQ. Hats off to them.

Did you use the self installer or get yours working? I'm just trying to track downloads and successful installs.

[MQSEQ2]

Xeerex's doing a good job on getting out the Installer version, keep up the good work

[xeerex]

Thanks. Its the least I can do. Besides, the way I figure it, the less time you guys spend chasing down simple install issues, the more time you have to add features. Everything has a motive~~:D

[MQSEQ2]

Very true. Since you brought out Tux, I brought out the Devil and it's prod'ing EQ. ;)