showeq 5 beta 7 troubles

[doox00]

just installed mandrake 10, got showeq 5 beta 7 I believe it was from sourceforge webpage. I have it installed, it runs but its not working. I have tried this cvs stuff I see in the forums but when I do the commands it asks for a CVS password.

Here is what showeq shows in the terminal window when running:


ShowEQ 5.0.0.7, released under the GPL.
SINS 0.5, released under the GPL.
All ShowEQ source code is Copyright (C) 2000-2004 by the respective ShowEQ Developers
ShowEQ comes with NO WARRANTY.

You may redistribute copies of ShowEQ under the terms of
The GNU General Public License.
See: http://www.gnu.org/copyleft/gpl.html for more details...

For updates and information, please visit http://seq.sourceforge.net/
ShowEQ 5.0.0.7, Built from 'main.cpp' on Jul 15 2004 at 20:14:42
CVS: @(#) $Id: main.cpp,v 1.33.6.3 2004/01/16 20:22:10 dohpaz Exp $ $Name: pre_5_0_beta $
Using GCC version: 3.3.2
Using glibc version: 2.3
Using Qt version: 3.2.3
Using headers from linux version: 2.6.0
Using EQItemDB: @(#) $Id: itemdb.cpp,v 1.10.6.1 2003/12/07 06:30:43 dohpaz Exp $ $Name: pre_5_0_beta $
Using GDBM: This is GDBM version 1.8.0, as of May 19, 1999.
Running on Linux release 2.6.3-7mdk for processor i686

Using config file '/root/.showeq/showeq.xml'
Loaded preferences file: /usr/local/share/showeq/seqdef.xml!
Loaded preferences file: /root/.showeq/showeq.xml!
Info: Listening for first client seen.
Info: Initializing Packet Capture Thread:
Info: Filtering packets on device eth0, searching for EQ client...
Warning: Spells: Failed to open: '/usr/local/share/showeq/spells_us.txt'
Warning: GuildMgr: Could not load guildsfile, /root/.showeq/tmp/guilds2.dat
Debug: ItemDB: Disabled
Info: Loading Filters from '/home/dookie/download/showeq'
Info: Loading Zone Filter File: /home/dookie/download/showeq
Info: Loading Zone Filter File: /home/dookie/download/showeq
Info: Categories Reloaded
Info: No Map found for zone 'unknown'!
Info: Checked for all variants of 'unknown.map', 'unknown.txt', and 'unknown_1.txt'
Info: in directories '/root/.showeq/maps' and '/usr/local/share/showeq/maps'!
Warning: EQStr: Failed to open '/usr/local/share/showeq/eqstr_us.txt'

Info: Client Detected: 192.168.1.5
Warning: OP_RandomReq (0x198) (dataLen: 4) doesn't match: sizeof(randomReqStruct):8
Warning: error on zone-client: size > left (size=178, left=74, opcode=0x0027)
Warning: OP_TimeOfDay (0x27) (dataLen: 29) doesn't match: sizeof(timeOfDayStruct):8
Warning: error on zone-client: size > left (size=217, left=49, opcode=0x0027)
Warning: OP_TimeOfDay (0x27) (dataLen: 18) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 38) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 147) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 215) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 165) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 38) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 205) doesn't match: sizeof(timeOfDayStruct):8
QDate::setYMD: Invalid date 0770-00-00
QTime::setHMS Invalid time -1:00:00.000
Time:
Warning: OP_TimeOfDay (0x27) (dataLen: 58) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 0) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 0) doesn't match: sizeof(timeOfDayStruct):8
Warning: error on zone-client: size > left (size=146, left=24, opcode=0x0027)
Warning: OP_TimeOfDay (0x27) (dataLen: 18) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 18) doesn't match: sizeof(timeOfDayStruct):8
Warning: error on zone-client: size > left (size=217, left=26, opcode=0x003e)
Warning: error on zone-client: size > left (size=55, left=20, opcode=0x012c)
Warning: OP_TimeOfDay (0x27) (dataLen: 29) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 7) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 45) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 205) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 27) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 127) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 208) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 192) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 0) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 0) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 0) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 72) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 68) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 67) doesn't match: sizeof(timeOfDayStruct):8
Warning: OP_TimeOfDay (0x27) (dataLen: 49007) doesn't match: sizeof(timeOfDayStruct):8
Segmentation fault
[root@Ground-0 .showeq]#



any help would be appreciated.

[bonkersbobcat]

just install mandrake 10, got showeq 5 beta 7 I believe it was from sourceforge webpage. I have it installed, it runs but its not working. I have tried this cvs stuff I see in the forums but when I do the commands it asks for a CVS password.
Here is what showeq shows in the terminal window when running:


ShowEQ 5.0.0.7, released under the GPL.


You are trying to run version 5.0.0.7 which dates back to May. There have been several changes to the opcodes and packets since then and the version you have will not work.

The current version in CVS is 5.0.0.11 that was uploaded earlier today. Due to how SourceForge works you won't be able to get to that version until sometime tomorrow.

You have two basic options.

1) Wait until tomorrow and download, build, and install the 5.0.0.11 version from CVS.

2) Download the 5.0.0.10 version from CVS right now and apply the patches that were posted in the Development forum. After patching you will need to build and install.

Edit: Moved reponse to proper thread.

BB

[bonkersbobcat]

Responding to your post on the other (hijacked) thread...

how do you do this? download it from CVS? not sure how this cvs works.
You will have to look around here a bit and use search. There are ample directions in these forums on the process to download and build SEQ. You will find the culture here is to "Help those who help themselves" and to be really mean and nasty to people who make no effort to solve problems on their own.

BB

[doox00]

did a search on cvs here, found 3 threads.. none explaining how it works :/

[purple]

Ironically, the original post you hijacked has exactly what you need to use cvs to fetch and build...

[doox00]

I tried the cvs commands there, it kept promping me for a CVS password

[purple]

As it should. Anoncvs password is empty. Just hit enter.