tano
04-24-2006, 12:26 PM
Hi all
I have been happily using ShowEQ for years and switched to the Debian packaged distribution last year sometime. All was fine on 5.3.0.0 but I can't get it working at all under 5.4.0.0. Here is the console log (I turned on Network debugging)
debian:~# showeq
ShowEQ 5.4.0.0, released under the GPL.
SINS 0.5, released under the GPL.
All ShowEQ source code is Copyright (C) 2000-2005 by the respective ShowEQ Devel opers
ShowEQ comes with NO WARRANTY.
You may redistribute copies of ShowEQ under the terms of
The GNU General Public License.
See: http://www.gnu.org/copyleft/gpl.html for more details...
For updates and information, please visit http://seq.sourceforge.net/
ShowEQ 5.4.0.0, Built from 'main.cpp' on Apr 23 2006 at 23:20:17
CVS: @(#) $Id: main.cpp,v 1.35 2005/10/05 15:29:08 cmmalone Exp $ $Name: $
Using GCC version: 3.3.5
Using glibc version: 2.3
Using Qt version: 3.3.4
Using headers from linux version: 2.6.0-test7
Using EQItemDB: @(#) $Id: itemdb.cpp,v 1.12 2005/12/10 23:27:15 cmmalone Exp $ $Name: $
Using GDBM: GDBM version 1.8.3. 10/15/2002 (built Sep 9 2003 00:02:26)
Running on Linux release 2.6.8-2-386 for processor i686
Using config file '/root/.showeq/showeq.xml'
Loaded preferences file: /usr/local/share/showeq/seqdef.xml!
Loaded preferences file: /root/.showeq/showeq.xml!
Info: Listening for first client seen.
Info: Initializing Packet Capture Thread:
Info: Filtering packets on device eth0, searching for EQ client...
Info: Loaded 8558 spells from '/usr/local/share/showeq/spells_us.txt' maxSpell=0 x237c
Info: GuildMgr: Guildsfile loaded
Debug: ItemDB: Disabled
Info: Loading Filters from '/root'
Info: Loading Zone Filter File: /root
Info: Loading Zone Filter File: /root
Info: Categories Reloaded
Info: No Map found for zone 'unknown'!
Info: Checked for all variants of 'unknown.map', 'unknown.txt', and 'unknown _1.txt'
Info: in directories '/root/.showeq/maps' and '/usr/local/share/showeq/maps' !
Debug: connect2: Warning! opcode 'OP_Action' has no matching payload.
Debug: dir '1' payload 'actionAltStruct' szt '1'
Debug: for receiver 'spellshell' of type 'SpellShell' to member '1action(const uint8_t*, size_t, uint8_t)'
Info: Loaded 5983 message strings from '/usr/local/share/showeq/eqstr_us.txt' ma xFormat=35003
Info: Listening for first client seen.
Info: Initializing Packet Capture Thread:
Info: Filtering packets on device eth0, searching for EQ client...
Info: Client Detected: 192.168.3.10
Debug: PCAP Filter Set: (udp[0:2] = 9000 or udp[2:2] = 9000 or udp[0:2] = 9876 o r udp[0:2] = 1465 or udp[2:2] = 1465) and host 192.168.3.10 and ether proto 0x08 00
Info: EQPacket: SessionRequest detected, pcap filter: EQ Client 192.168.3.10, Cl ient port 1465. Server port 1398
Warning: SEQ: Giving up on finding arq 0173 in stream zone-client cache, skippin g!
I have used tcpdump to check that I was getting packets and saw loads going to and from my EQ pc to a zone server so I don't think it is a networking problem (+ nothing has changed in my setup between 5.3 and 5.4 *as far as I know ;)*). I have tried building straight from the source code (rather than using Tanner's excellent packages) but this had exactly the same problem. I even tried installing sid and trying to get it working on that but still didn't get any pretty colours.
Anyone got any ideas cause I'm at my wit's end?
Tano
I have been happily using ShowEQ for years and switched to the Debian packaged distribution last year sometime. All was fine on 5.3.0.0 but I can't get it working at all under 5.4.0.0. Here is the console log (I turned on Network debugging)
debian:~# showeq
ShowEQ 5.4.0.0, released under the GPL.
SINS 0.5, released under the GPL.
All ShowEQ source code is Copyright (C) 2000-2005 by the respective ShowEQ Devel opers
ShowEQ comes with NO WARRANTY.
You may redistribute copies of ShowEQ under the terms of
The GNU General Public License.
See: http://www.gnu.org/copyleft/gpl.html for more details...
For updates and information, please visit http://seq.sourceforge.net/
ShowEQ 5.4.0.0, Built from 'main.cpp' on Apr 23 2006 at 23:20:17
CVS: @(#) $Id: main.cpp,v 1.35 2005/10/05 15:29:08 cmmalone Exp $ $Name: $
Using GCC version: 3.3.5
Using glibc version: 2.3
Using Qt version: 3.3.4
Using headers from linux version: 2.6.0-test7
Using EQItemDB: @(#) $Id: itemdb.cpp,v 1.12 2005/12/10 23:27:15 cmmalone Exp $ $Name: $
Using GDBM: GDBM version 1.8.3. 10/15/2002 (built Sep 9 2003 00:02:26)
Running on Linux release 2.6.8-2-386 for processor i686
Using config file '/root/.showeq/showeq.xml'
Loaded preferences file: /usr/local/share/showeq/seqdef.xml!
Loaded preferences file: /root/.showeq/showeq.xml!
Info: Listening for first client seen.
Info: Initializing Packet Capture Thread:
Info: Filtering packets on device eth0, searching for EQ client...
Info: Loaded 8558 spells from '/usr/local/share/showeq/spells_us.txt' maxSpell=0 x237c
Info: GuildMgr: Guildsfile loaded
Debug: ItemDB: Disabled
Info: Loading Filters from '/root'
Info: Loading Zone Filter File: /root
Info: Loading Zone Filter File: /root
Info: Categories Reloaded
Info: No Map found for zone 'unknown'!
Info: Checked for all variants of 'unknown.map', 'unknown.txt', and 'unknown _1.txt'
Info: in directories '/root/.showeq/maps' and '/usr/local/share/showeq/maps' !
Debug: connect2: Warning! opcode 'OP_Action' has no matching payload.
Debug: dir '1' payload 'actionAltStruct' szt '1'
Debug: for receiver 'spellshell' of type 'SpellShell' to member '1action(const uint8_t*, size_t, uint8_t)'
Info: Loaded 5983 message strings from '/usr/local/share/showeq/eqstr_us.txt' ma xFormat=35003
Info: Listening for first client seen.
Info: Initializing Packet Capture Thread:
Info: Filtering packets on device eth0, searching for EQ client...
Info: Client Detected: 192.168.3.10
Debug: PCAP Filter Set: (udp[0:2] = 9000 or udp[2:2] = 9000 or udp[0:2] = 9876 o r udp[0:2] = 1465 or udp[2:2] = 1465) and host 192.168.3.10 and ether proto 0x08 00
Info: EQPacket: SessionRequest detected, pcap filter: EQ Client 192.168.3.10, Cl ient port 1465. Server port 1398
Warning: SEQ: Giving up on finding arq 0173 in stream zone-client cache, skippin g!
I have used tcpdump to check that I was getting packets and saw loads going to and from my EQ pc to a zone server so I don't think it is a networking problem (+ nothing has changed in my setup between 5.3 and 5.4 *as far as I know ;)*). I have tried building straight from the source code (rather than using Tanner's excellent packages) but this had exactly the same problem. I even tried installing sid and trying to get it working on that but still didn't get any pretty colours.
Anyone got any ideas cause I'm at my wit's end?
Tano